page_banner

product

2-Ethylhexyl acrylate(CAS#103-11-7)

Chemical Property:

Molecular Formula C11H20O2
Molar Mass 184.28
Density 0.885g/mLat 25°C(lit.)
Melting Point -90°C
Boling Point 215-219°C(lit.)
Flash Point 175°F
Solubility 0.1g/l
Vapor Presure 0.15 mm Hg ( 20 °C)
Vapor Density 6.4 (vs air)
Appearance Liquid
Color Clear
Odor Ester like odour
Exposure Limit ACGIH: TWA 5 mg/m3NIOSH: TWA 5 mg/m3
BRN 1765828
Storage Condition Store below +30°C.
Stability Stability Stable, but polymerizes readily, so is usually inhibited with hydroquinone or its monomethyl ether. Susceptible to hydrolysis. Combustible. Incompatible with oxidizing agents.
Explosive Limit 0.9-6.0%(V)
Refractive Index n20/D 1.436(lit.)
Physical and Chemical Properties Character: colorless transparent liquid.
melting point -90 ℃
boiling point 215~219 ℃
relative density 0.8859
refractive index 1.4358
flash point 82 ℃
solubility practically insoluble in water. Miscible with alcohol and ether.
Use Used as a polymeric monomer, for soft polymers, for internal plasticization in copolymers

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes R37/38 – Irritating to respiratory system and skin.
R43 – May cause sensitization by skin contact
Safety Description S36/37 – Wear suitable protective clothing and gloves.
S46 – If swallowed, seek medical advice immediately and show this container or label.
UN IDs UN 3334
WGK Germany 1
RTECS AT0855000
FLUKA BRAND F CODES 10-23
TSCA Yes
HS Code 29161290
Toxicity LD50 orally in Rabbit: 4435 mg/kg LD50 dermal Rabbit 7522 mg/kg

 

Introduction

Acrylate-2-ethylhexyl is a colorless liquid with a pungent odor. The following is about the properties and uses of acrylate-2-ethylhexyl:Quality:- It is soluble in many organic solvents, such as alcohols, ethers, ketones, and aromatic hydrocarbons, among others.- It is less reactive with strong acids and bases.Use:- Acrylate-2-ethylhexyl is primarily used as a solvent in organic synthesis.- It is also used in the preparation of softeners, coatings, inks, adhesives, and other products.Preparation method:The preparation of acrylate-2-ethylhexyl acid is usually obtained by reacting acrylic acid with 2-ethylhexanol. The reaction is carried out under acidic conditions and a catalyst is used to facilitate the reaction.Safety Information:- Acrylate-2-ethylhexyl acid is a flammable liquid and should be kept away from fire sources and high temperatures.- When using it, be careful to avoid inhalation and contact with sensitive areas such as skin and eyes.- Appropriate PPE, such as protective gloves and goggles, should be worn when using it.- When storing and handling acrylate-2-ethylhexyl, follow relevant safe operating procedures and handling methods.- When disposing of waste, it should comply with the requirements of local environmental regulations.


  • Previous:
  • Next:

  • Write your message here and send it to us