page_banner

product

Dimethylbenzylcarbinyl acetate(CAS#151-05-3)

Chemical Property:

Molecular Formula C12H16O2
Molar Mass 192.25
Density 0.998 g/mL at 25 °C (lit.)
Melting Point 31.0 to 35.0 °C
Boling Point 250 °C (lit.)
Flash Point 206°F
JECFA Number 1655
Water Solubility 774.88mg/L at 20℃
Vapor Presure 1.9-2.9Pa at 20-25℃
Appearance neat
Storage Condition -20°C
Refractive Index n20/D 1.4925(lit.)
Physical and Chemical Properties Colorless oily liquid, with flowers, fruit sweet aroma. The melting point is 29~30 ℃, the boiling point is 250 ℃, and the flash point is above 100 ℃. Cure at room temperature. Soluble in ethanol, most non-volatile oils and mineral oils, slightly soluble in propylene glycol, insoluble in glycerol and water.
Use For the deployment of a variety of cosmetics, soap and food flavors

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/38 – Irritating to eyes and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
WGK Germany 2
RTECS SG8100000
HS Code 29153900
Toxicity LD50 orl-rat: 3300 mg/kg FCTXAV 12,533,74

 

Introduction

Dimethylbenzyl acetate. Below is an introduction to its properties, uses, preparation, and safety information:Properties:- Appearance: Colorless liquid- Odor: Slightly aromatic- Solubility: Soluble in alcohols and ethers, insoluble in water.Uses:- Dimethylbenzyl acetate can be used as a solvent in industrial products such as paints, coatings, and cleaners.- It is also commonly used in the manufacture of perfumes and fragrances, giving products a pleasant aroma.Preparation:- The preparation of dimethylbenzyl acetate is usually achieved through an esterification reaction. A common method is to mix benzyl alcohol with acetic acid, formic acid, and an acid catalyst, and carry out the reaction at an appropriate temperature.Safety Information:- Dimethylbenzyl acetate is irritating to the eyes and skin and should be avoided upon contact. When working with it, proper personal protective equipment such as safety goggles, gloves, and protective clothing should be worn.- Ensure good ventilation during preparation and use to avoid inhaling vapors.- Follow relevant chemical safety protocols during storage and handling.


  • Previous:
  • Next:

  • Write your message here and send it to us