page_banner

product

Xylene(CAS#1330-20-7)

Chemical Property:

Molecular Formula C8H10
Molar Mass 106.17
Density 0.86 g/mL at 25 °C (lit.)
Melting Point -34 °C
Boling Point 137-140 °C (lit.)
Flash Point 77°F(lit.)
Vapor Presure 18 mm Hg ( 37.7 °C)
Vapor Density 3.7 (vs air)
Appearance Liquid
Color APHA: ≤10
Exposure Limit ACGIH: TWA 100 ppm; STEL 150 ppmOSHA: TWA 100 ppm(435 mg/m3)
Merck 14,10081
BRN 1901563
Storage Condition Flammables area
Explosive Limit 7%
Refractive Index n20/D 1.497(lit.)
Physical and Chemical Properties Thetrait was a mixture of P-xylene, O-xylene, M-xylene and ethylbenzene. Colorless transparent liquid.
relative density about 0.86
flash point 27.2~46.1 ℃
solubility: soluble in ethanol and ether, insoluble in water.
Use Widely used as organic solvents and synthetic medicines, coatings, resins, dyes, explosives and pesticides and other raw materials

Product Detail

Product Tags

Risk Codes R10 – Flammable
R20/21 – Harmful by inhalation and in contact with skin.
R38 – Irritating to the skin
R36/38 – Irritating to eyes and skin.
R65 – Harmful: May cause lung damage if swallowed
R48/20 -
Safety Description S25 – Avoid contact with eyes.
S36/37 – Wear suitable protective clothing and gloves.
S62 – If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label.
UN IDs UN 1307 3/PG 3
WGK Germany 2
RTECS ZE2100000
TSCA Yes
HS Code 29024400
Hazard Class 3
Packing Group II
Toxicity LD50 oral in rat: 4300mg/kg

 

Introduction

Mixed xylene is a mixture of three isomers (O-xylene, M-xylene, and p-xylene). The following is an introduction to the properties, uses, preparation methods and safety information of mixed xylene:Quality:is a colorless transparent liquid with a special aromatic odor.Use:1. It has a wide range of uses in the chemical field. It is an excellent organic solvent that is often used to dissolve resins, rubber, paints and coatings, etc.2. It can also be used as a cleaning agent, degreaser and extractant.Preparation method:Mixed xylene can be obtained by fractional distillation during petroleum refining. When light hydrocarbons are extracted from petroleum, they can be obtained by mixing xylene through further separation and purification.Safety Information:1. Long-term exposure to high concentrations of xylene vapor can lead to health problems such as headaches, dizziness, and nervous system damage.2. When using mixed xylene, ensure good ventilation and avoid inhaling vapors.3. Avoid prolonged contact with skin and eyes, and ensure that the container is well sealed when stored, away from fire and high temperatures.4. If you accidentally come into contact or inhale mixed xylene, you should seek medical attention immediately.


  • Previous:
  • Next:

  • Write your message here and send it to us