page_banner

product

2-Ethoxynaphthalene(CAS#93-18-5)

Chemical Property:

Molecular Formula C12H12O
Molar Mass 172.22
Density 1.0640
Melting Point 35-37°C(lit.)
Boling Point 282°C
Flash Point 134°C
JECFA Number 1258
Water Solubility insoluble
Solubility alcohol: soluble
Vapor Presure 0.518Pa at 25℃
Appearance neat
Color White to Almost white
Merck 14,3752
BRN 2042397
Refractive Index 1.5975 (estimate)
Physical and Chemical Properties Appearance: white crystalsMelting Point: 37Boiling Point: 282

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 38 – Irritating to the skin
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S24/25 – Avoid contact with skin and eyes.
WGK Germany 2
RTECS QJ6900000
TSCA Yes
HS Code 29093090

 

Introduction

β-Naphthyl ether is an organic compound. It is a colorless liquid with an aromatic odor. The following is an introduction to the properties, uses, preparation, and safety information of β-naphthyl ether:Properties:It has good stability and is not easily affected by light or oxygen in the air.β-Naphthyl ether has relatively low toxicity and causes minimal irritation to the skin and eyes.Uses:β-Naphthyl ether is widely used in the field of organic synthesis and can serve as a solvent, reagent, and catalyst.It can also be used as an intermediate in organic synthesis reactions, such as esterification, acylation, and hydroxyl protection reactions.Preparation:β-Naphthyl ether can be prepared through the acidic etherification reaction of naphthalene with ethanol. The specific steps may include:Adding an acid catalyst, such as sulfuric acid or phosphoric acid, to the alcohol.Gradually adding ethanol to the alcohol and heating the reaction mixture.Carrying out the reaction at an appropriate temperature and duration.The resulting product can be purified by distillation, extraction, or crystallization.Safety Information:β-Naphthyl ether is a flammable liquid and should be kept away from open flames and high temperatures.Appropriate protective gloves, goggles, and clothing should be worn when handling it.Do not inhale the vapors, and ensure operations are conducted in a well-ventilated area.In case of skin or eye contact, rinse immediately with plenty of water; seek medical attention if significant discomfort occurs.Follow relevant safety procedures and regulations during storage and use.


  • Previous:
  • Next:

  • Write your message here and send it to us