Geranyl Nitrile, chemically designated as 3,7-dimethylocta-2,6-dienenitrile (CAS: 5146-66-7 for the (E)/(Z) isomer mixture; individual isomers 5585-39-7 for (E) and 31983-27-4 for (Z)), is an acyclic monoterpene nitrile with the molecular formula C₁₀H₁₅N and a molecular weight of 149.23 g/mol. The compound is also known commercially as Citral Nitrile, Citralva, and Geranonitrile, reflecting its structural derivation from citral (a mixture of geranial and neral) via nitrile formation. At first glance, its intense fresh, lemon-like, and slightly metallic odor profile suggests a conventional aroma chemical, and the material has historically been catalogued by ingredient distributors under fragrance and flavor functions. However, the regulatory reality of Geranyl Nitrile is fundamentally different: the Expert Panel for Fragrance Safety, under the IFRA framework, has concluded that the substance should not be used as a fragrance ingredient, and it is classified as prohibited under the IFRA Standard due to genotoxicity concerns. This prohibition is not a recent technicality; it was formalized in IFRA Amendment 43 and remains in force, with the material also listed in EU Cosmetics Regulation Annex II.
This regulatory status has a direct and defining consequence for the molecule’s commercial identity: Geranyl Nitrile is not a viable fragrance ingredient, and its market relevance rests almost entirely on its role as a synthetic intermediate and building block. The compound is explicitly described as serving as a “critical electrophilic intermediate in the synthesis of terpenoid agrochemicals” and as a “building block and intermediate in synthetic and analytical work, with custom quantities available on request”. The Australian industrial chemicals assessment notes its “site-limited use” as an intermediate in the manufacture of other chemicals. For suppliers and customers, understanding Geranyl Nitrile therefore requires a clear shift in perspective: the molecule’s value lies not in its odor—however intense—but in its chemical behavior as a stabilized, functionalized terpene chain that can be diverted toward higher-value targets. XINCHEM’s supply positioning for Geranyl Nitrile is built around this intermediate identity, serving custom synthesis, agrochemical process development, and research building-block demand with documentation appropriate to fine chemical supply chains.
Core Application Field: The Agrochemical and Custom Synthesis Intermediate Role
The primary commercial rationale for Geranyl Nitrile is its function as a “masked” or “holding-pattern” terpene intermediate in agrochemical and fine chemical synthesis. Citral, the aldehyde precursor from which Geranyl Nitrile is derived, is chemically fragile: it is prone to rapid oxidative degradation and polymerization under physiological and environmental conditions, which limits its utility in multi-step synthetic sequences. Conversion of citral to the corresponding nitrile addresses this stability problem while preserving the diene backbone for downstream elaboration. The nitrile group acts as a bioisostere for the carbonyl, improving metabolic stability in insect gut environments, and it can be selectively converted to an amine (yielding geranylamine, a scaffold for fungicides) or to an acid (yielding geranic acid, a precursor to juvenile hormone analog insecticides) without compromising the sensitive unsaturated chain.
This “divergent precursor” logic is the core of Geranyl Nitrile’s demand. Chemists can perform modifications elsewhere on the terpene skeleton while the nitrile serves as a robust placeholder, then unmask the desired functionality at the appropriate stage of the synthesis. The compound is also used in the synthesis of certain pesticides and plant growth regulators, and as a specialized intermediate in custom synthesis and fine chemical production. The literature additionally describes routes to geranyl nitrile from citral via catalytic ammoxidation, oxime dehydration, and copper-catalyzed protocols, reflecting the molecule’s established accessibility from a renewable terpene feedstock.
The demand profile for Geranyl Nitrile is therefore project-driven rather than volume-driven. Customers are typically process chemistry groups, agrochemical R&D organizations, and CDMO teams requiring research-scale through pilot-scale quantities of a well-defined terpene nitrile building block, rather than fragrance houses seeking a bulk odorant. This demand structure aligns with the custom synthesis classification of the molecule and explains why commercial offerings are frequently positioned around “custom quantities” and “custom synthesis” rather than catalogue-scale fragrance supply.
It is also important to distinguish Geranyl Nitrile from its saturated analog, citronellyl nitrile (3,7-dimethyloct-6-enenitrile), which has been described as a fragrance material with a rose-like character and has been explored as a geranonitrile substitute in fragrance combinations. Geranyl Nitrile, with its conjugated diene system, occupies a different chemical and regulatory space: its reactive unsaturation makes it a more versatile synthetic handle but also underlies the genotoxicity concern that drove the fragrance prohibition. This structural distinction is a key point of technical clarity that a qualified supplier must communicate.
Market Participants and the Supply Landscape
The commercial supply of Geranyl Nitrile is characterized by a research-and-custom-synthesis orientation rather than a commodity fragrance model. Catalogue offerings are available from specialty research chemical suppliers at gram-to-multi-gram scales, typically at ≥95% purity (GC) as the (E)/(Z) mixture, with pricing that reflects small-batch research supply economics. Larger or customized quantities are generally quoted on a custom synthesis basis, and the material is not typically stocked as a bulk fragrance ingredient because its regulatory status forecloses that end use.
Within this landscape, XINCHEM’s role is to provide Geranyl Nitrile as a documented custom synthesis intermediate rather than as a catalogue odorant. This positioning reflects the molecule’s actual demand structure: customers need a chemically defined terpene nitrile with controlled isomeric composition, appropriate purity for downstream transformations, and documentation that supports process development and regulatory filings. XINCHEM’s supply model emphasizes specification flexibility, batch traceability, and analytical support—capabilities that are more relevant to intermediate customers than the olfactive consistency requirements of fragrance compounding.
The competitive differentiation in this molecule is therefore technical rather than sensory. Suppliers that can offer isomeric specification (E/Z ratio control), impurity profiling relevant to downstream reactions, and packaging configurations suited to process chemistry workflows are better positioned than suppliers treating Geranyl Nitrile as a generic research chemical. XINCHEM addresses this by framing its offering around the molecule’s synthetic utility and by providing CoA, TDS, and SDS documentation that supports customer qualification in agrochemical and fine chemical development contexts.
Regional Market Dynamics
The demand geography for Geranyl Nitrile follows the distribution of agrochemical process development and fine chemical custom synthesis activity. Europe and North America host significant agrochemical R&D and CDMO capacity, and these regions generate project-based demand for terpene nitrile intermediates in the development of juvenile hormone analogs, fungicide scaffolds, and other terpenoid-derived crop protection chemistries. Regulatory infrastructure in these regions is well defined for industrial chemicals, and the material’s IFRA prohibition is clearly documented, reducing the risk of misapplication in fragrance contexts.
Asia-Pacific is both a production and a consumption region for Geranyl Nitrile intermediates. The region’s agrochemical manufacturing base, particularly in India and China, creates demand for terpene-derived building blocks, and local custom synthesis suppliers serve both domestic process development and export-oriented CDMO projects. XINCHEM’s China-based supply position places it within this production cluster, enabling responsive supply to regional agrochemical and fine chemical customers while serving international clients with documentation-aligned material.
Latin America and other agricultural economies represent downstream demand centers where agrochemical formulation and manufacturing create indirect pull for terpene nitrile intermediates. The trade flow for Geranyl Nitrile therefore reflects a pattern of research-scale and pilot-scale material moving from specialty suppliers to process development groups, with custom synthesis suppliers acting as the flexible interface between terpene feedstock availability and project-specific intermediate requirements.
Regulatory and Quality Considerations
The regulatory profile of Geranyl Nitrile is defined by a sharp contrast between its fragrance prohibition and its status as an industrial intermediate. Under the IFRA Standard, the material is prohibited for use as a fragrance ingredient, with genotoxicity identified as the intrinsic property driving risk management. The Expert Panel concluded that it should not be used as a fragrance ingredient or in fragrance ingredients above unavoidable trace levels until sufficient additional data support safe use. This prohibition is reflected in EU Cosmetics Regulation Annex II, and the material is not listed in UN 1988 Convention Tables or India’s NDPS controlled substances order, indicating that its regulatory constraint is specific to fragrance use rather than a general narcotics or precursor control.
For industrial and intermediate applications, the relevant quality framework shifts to chemical specification and supply-chain documentation: identity, assay, isomeric composition (E/Z ratio), residual solvents, and trace impurities relevant to downstream reactions. Geranyl Nitrile is a colorless to pale yellow liquid with a density of approximately 0.87 g/cm³, a boiling point around 222 °C, and a refractive index of about 1.48; it is typically specified at ≥95% purity (GC) for research and custom synthesis grades. The material should be stored under inert or well-ventilated conditions protected from prolonged air and light exposure, consistent with the sensitivity of the diene system to oxidation and polymerization.
XINCHEM’s quality documentation for Geranyl Nitrile is structured to support intermediate-grade qualification: CoA data covering assay and isomeric composition, TDS information describing physicochemical properties and handling, and SDS documentation aligned with GHS requirements. This documentation depth is particularly important for customers developing agrochemical or pharmaceutical-adjacent processes, where supplier qualification requires traceability and analytical transparency beyond a simple catalogue listing.
Future Outlook
The outlook for Geranyl Nitrile is tied to the trajectory of terpenoid agrochemical development and the broader demand for stabilized, bio-based building blocks in custom synthesis. As crop protection chemistry continues to emphasize reduced environmental persistence and improved selectivity, terpene-derived scaffolds remain an active area of discovery, and the nitrile’s role as a “masked carbonyl” with improved metabolic stability positions it as a useful tool in that search. The molecule’s derivation from citral, a renewable terpene feedstock, also aligns with the industry’s increasing interest in bio-based intermediates, although the fragrance prohibition means that this bio-based attribute must be communicated in an intermediate context rather than a consumer-fragrance context.
The principal challenge for the molecule is its narrow application window: with fragrance use foreclosed, demand depends on the pace of agrochemical and fine chemical project activity rather than on consumer product volumes. This makes Geranyl Nitrile a project-driven specialty rather than a volume growth story, and it places a premium on suppliers that can support early-stage process development with flexible quantities, analytical documentation, and technical understanding of the molecule’s synthetic behavior.
XINCHEM’s strategic focus on Geranyl Nitrile reflects this project-driven reality. By supplying the material as a documented custom synthesis intermediate—rather than as a fragrance ingredient—XINCHEM aligns its offering with the molecule’s actual regulatory and commercial identity. The company’s ability to provide specification flexibility, isomeric composition data, and CoA/TDS/SDS documentation makes it a practical partner for agrochemical process chemistry groups, CDMO teams, and research organizations seeking a reliable source for this stabilized terpene nitrile building block.
In summary, Geranyl Nitrile (Citral Nitrile, CAS: 5146-66-7) is a molecule whose commercial identity is defined by regulatory reality rather than olfactory first impressions. Prohibited as a fragrance ingredient due to genotoxicity concerns, it retains clear value as a stabilized terpene nitrile intermediate in agrochemical synthesis and custom building-block applications. For customers seeking a Geranyl Nitrile supplier that understands this intermediate identity and can provide documented, specification-flexible material for process development, XINCHEM offers a focused and technically grounded supply solution.
Shanghai XinChem Co., Ltd. (XinChem)
As a world-leading supplier of organic chemicals, Shanghai XinChem Co., Ltd. (XinChem) focuses on the innovative needs of the pharmaceutical, agrochemical, flavor, fragrance, and fine chemical industries. Leveraging core competencies in synthetic chemistry, nitrile and terpene intermediate supply, and quality documentation, XINCHEM provides high-quality Geranyl Nitrile (Citral Nitrile, CAS: 5146-66-7) to global customers for custom synthesis, agrochemical process development, and research applications.
1. Technical Advantages
Synthetic Route Understanding and Isomeric Control
XINCHEM applies controlled synthetic protocols to produce Geranyl Nitrile as the (E)/(Z) mixture with defined isomeric composition and ≥95% purity (GC). The process is designed to deliver material suitable for downstream transformations, with analytical control points covering assay, isomeric ratio, and key impurities relevant to agrochemical and fine chemical synthesis.
Intermediate-Grade Documentation
Each lot of Geranyl Nitrile is supported by a documentation package including Certificate of Analysis (CoA), Technical Data Sheet (TDS), and Safety Data Sheet (SDS). XINCHEM’s documentation addresses the specifications relevant to intermediate qualification—identity, assay, isomeric composition, and handling precautions—enabling customers to integrate the material into process development with reduced qualification friction.
2. Product Advantages
Defined Specification for Synthetic Utility
Geranyl Nitrile is supplied at ≥95% purity (GC) with isomeric composition specified, ensuring suitability as a building block in agrochemical and fine chemical routes. The material’s nitrile functionality provides a stable “masked carbonyl” handle while preserving the diene backbone for downstream elaboration.
Flexible Quantities for Project Development
XINCHEM provides Geranyl Nitrile in quantities suited to research, pilot, and process development stages, supporting customers who require the intermediate across early feasibility studies and scale-up. Packaging configurations are adapted to the handling and storage requirements of nitrile intermediates.
Supply Reliability with Analytical Transparency
XINCHEM maintains flexible supply arrangements for Geranyl Nitrile, with batch traceability and analytical documentation that support customer audits and regulatory filings. Storage recommendations are provided to preserve chemical quality across the supply chain.
3. Application Fields
Agrochemical Intermediate and Process Chemistry: Geranyl Nitrile serves as a stabilized terpene nitrile intermediate for the synthesis of geranylamine scaffolds (fungicides), geranic acid derivatives (juvenile hormone analog insecticides), and other terpenoid agrochemical targets. Its nitrile group acts as a masked carbonyl, improving metabolic stability and enabling divergent functionalization.
Custom Synthesis and Building-Block Applications: The compound is used as a building block in synthetic and analytical work, with applications in the preparation of complex molecules for research and development. Its defined structure and isomeric composition make it suitable for route scouting and process development in CDMO and fine chemical settings.
Research and Organic Synthesis: Geranyl Nitrile is utilized in academic and industrial research as a terpene-derived nitrile building block, supporting methodology development and the construction of functionalized terpenoid structures.
4. Service Support
Application-Aware Technical Guidance
XINCHEM’s technical team provides guidance on Geranyl Nitrile specifications for intermediate applications, including isomeric composition considerations, handling precautions, and documentation alignment for agrochemical and fine chemical process development. This support helps customers select the appropriate grade and documentation package for their intended synthetic use.
5. Reasons to Choose XinChem
Professionalism: Deep experience in organic chemicals, nitrile intermediates, and custom synthesis building blocks, with a quality orientation suited to agrochemical and fine chemical supply chains.
Flexibility: Specification customization, packaging options, and documentation packages tailored to research, pilot, and process development requirements.
Cost-effectiveness: A balance of consistent quality, competitive pricing, and responsive technical service for a project-driven terpene nitrile intermediate.
Contact us now to start cooperation!
Website: www.xinchem.com
Email: sales1@xinchem.com
WhatsApp: +86 18049800532
Post time: Nov-20-2026
