The Dual-Function C6 Branched Alcohol Driving Mineral Flotation Frothing and Lubricant Additive Chemistry: Methyl Isobutyl Carbinol (MIBC, CAS# 108-11-2)

Methyl isobutyl carbinol (CAS# 108-11-2), also known as MIBC, 4-methyl-2-pentanol, 4-methylpentan-2-ol, methyl amyl alcohol, or isobutyl methyl carbinol, is a branched C6 aliphatic alcohol with the molecular formula C₆H₁₄O and a molecular weight of 102.17 g/mol. Its molecular structure features a secondary hydroxyl group attached to a branched isobutyl-methyl carbon skeleton—an architecture that confers a unique combination of moderate polarity, balanced water solubility, and selective adsorption at air-water interfaces. MIBC is a clear, colorless, flammable liquid with a mild alcoholic odor, a boiling point of 131.6–131.7°C, a flash point of approximately 41°C (closed cup), a density of 0.806–0.808 g/cm³ at 20°C, and a water solubility of 1.7% (mass fraction) at 20°C. It is miscible with most organic solvents and exhibits Hansen solubility parameters (δt = 19.8; δd = 15.2; δp = 2.4; δh = 12.4) that position it as an effective latent solvent and coupling agent.

MIBC occupies a distinctive position within the specialty chemicals landscape as a mature, single-molecule product whose industrial relevance is anchored in two primary demand pillars: mineral flotation and lubricant additive chemistry. Unlike broad-solvent categories driven by wide end-use expansion, MIBC’s global market is characterized by clear product boundaries, concentrated end-use structure, and relatively stable demand foundations. Global production reached approximately 100 kilotons in 2025, with an average market price of approximately USD 2,000 per ton. Its dual-functionality—as a frother that provides stable, selective froth in mineral processing and as a key intermediate in the synthesis of zinc dialkyldithiophosphate (ZDDP) anti-wear additives—positions it as a strategically important specialty chemical. Based on its chemical characteristics and industrial significance, this article systematically analyzes the key properties, core application areas, global market structure, regional dynamics, regulatory landscape, and future outlook of this strategically important branched alcohol.

Key Properties and Reactivity Profile

Methyl isobutyl carbinol (CAS# 108-11-2) is a C6 branched secondary alcohol whose value derives from its balanced surface activity, moderate polarity, and versatile reactivity as a chemical intermediate.

Key physicochemical parameters include:

• Molecular Formula: C₆H₁₄O
• Molecular Weight: 102.17–102.18 g/mol
• CAS Number: 108-11-2
• EINECS Number: 203-551-7
• MDL Number: MFCD00004574
• Synonyms: MIBC; 4-Methyl-2-pentanol; 4-Methylpentan-2-ol; Methyl amyl alcohol; Isobutyl methyl carbinol; 1,3-Dimethylbutanol
• Appearance: Clear, colorless liquid
• Odor: Mild alcoholic odor
• Boiling Point: 131.6–131.7°C
• Melting Point: −90°C
• Flash Point: 41°C (closed cup); 40.56°C (open cup)
• Density: 0.806–0.808 g/cm³ at 20°C
• Water Solubility: 1.7% (mass fraction) at 20°C; water in MIBC: 5.8% (mass fraction)
• Explosive Limits: 1.0–5.5 vol% in air
• Vapor Density (Air = 1): 3.5
• Hansen Solubility Parameters (25°C): δt = 19.8; δd = 15.2; δp = 2.4; δh = 12.4
• Purity: ≥98.0% (technical grade); ≥98.5% (standard); ≥99.5% (high-purity grade)
• Storage: Store in a cool, ventilated warehouse, away from fire and heat sources; keep container sealed
• GHS Classification: Warning; H226 (Flammable liquid and vapour), H319 (Causes serious eye irritation), H332 (Harmful if inhaled), H335 (May cause respiratory irritation)
• Transport Classification: UN 2053 (Methyl isobutyl carbinol), Class 3 (Flammable liquids), Packing Group III

The compound’s reactivity is defined by its secondary alcohol functional group, which can undergo esterification, etherification, oxidation, and dehydration reactions. The branched structure provides steric hindrance that moderates reactivity and contributes to the compound’s selective adsorption at air-water interfaces—the fundamental mechanism underlying its frothing activity in mineral flotation. MIBC is metabolized in biological systems to MIBK (4-methyl-2-pentanone, CAS 108-10-1) and subsequently to 4-hydroxy-4-methyl-2-pentanone, a metabolic pathway relevant to its toxicological profile assessment. The compound is chemically stable under recommended storage conditions but reacts with strong oxidants and may form explosive vapor-air mixtures above 41°C.

Core Application Fields and Demand

Market demand for methyl isobutyl carbinol (CAS# 108-11-2) is concentrated in four primary sectors: mineral flotation frothing (approximately 45–50% of global consumption), lubricant additive intermediate synthesis (approximately 30–35%), latent solvent and coating applications (approximately 10–15%), and other industrial applications including brake fluids and plasticizer precursors (approximately 5–10%). Its dual functionality as a flotation frother and lubricant additive intermediate serves as the core driver of sustained demand, with global production reaching approximately 100 kilotons in 2025 and the market valued at approximately USD 1.58 billion in 2025, projected to reach USD 2.16 billion by 2033 at a CAGR of 4%. The global MIBC market size is predicted to grow from USD 196 million in 2025 to USD 256 million in 2032, registering a CAGR of 4.0%.

In mineral flotation frothing, MIBC is a critical frother for the selective separation of valuable minerals from gangue in copper, molybdenum, coal, and polymetallic ore processing. Its molecular structure enables selective adsorption at the air-water interface, reducing surface tension and producing a stable, mineral-laden froth that can be efficiently recovered. MIBC is particularly well-suited for copper and molybdenum sulfide ore flotation, where its moderate water solubility (1.7%) and low surface tension ensure effective froth formation without excessive carryover of gangue minerals. Its effectiveness in recovering valuable minerals from low-grade ores has made it indispensable in the mining industry, especially as mining activities increase in developing regions and demand for mineral resources expands in Asia-Pacific. Global mining consumption of MIBC reached approximately 12.2 kilotons in 2024, with growth driven by copper, molybdenum, and coal flotation activities.

In lubricant additive intermediate synthesis, MIBC is a key feedstock for the production of zinc dialkyldithiophosphate (ZDDP), a widely used anti-wear and anti-corrosion additive in engine oils and industrial lubricants. The synthesis involves the reaction of MIBC with phosphorus pentasulfide and zinc oxide to form the ZDDP molecule, where the MIBC-derived alkyl groups contribute to the additive’s thermal stability and anti-wear performance. The growing global demand for high-performance lubricants, driven by automotive production and industrial machinery maintenance, provides a stable second demand pillar for MIBC. Other lubricant additive applications include the synthesis of anti-wear and corrosion inhibitors for specialty lubricant formulations.

In latent solvent and coating applications, MIBC serves as a coupling solvent for waterborne coatings, a latent solvent for coatings and inks, and a solvent for nitrocellulose and hot spray lacquers. Its moderate evaporation rate and balanced solubility profile enable it to function as a viscosity reducer and cure-rate modifier in coating formulations. MIBC is also used as a solvent for dyes and stains, cellulose ethers, ester gums, natural resins, phenolics, and waxes. As a non-HAP (non-Hazardous Air Pollutant) solvent, MIBC provides formulators with an environmentally preferable alternative to traditional aromatic solvents, although it is not on the EPA VOC exemption list. The compound’s moderate polarity and balanced solubility enable its use both as a frother in mineral flotation and as a latent solvent in coatings, brake fluids, and lubricant additive synthesis.

In other industrial applications, MIBC is used in the manufacture of brake fluids, as a precursor to certain plasticizers, and in the production of other specialty chemicals. It also finds use in fine chemistry applications and as an intermediate for the synthesis of plasticizers and other industrial products.

Major Market Participants

The global supply system for methyl isobutyl carbinol (CAS# 108-11-2) features a pattern of “integrated chemical corporations, specialized alcohol manufacturers, and Chinese producers serving distinct market segments.” The global market is characterized by a mix of large chemical corporations with integrated ketone-alcohol production chains and regional producers with cost advantages in raw material access.

In the global high-purity and branded segment, key international suppliers include Celanese Corporation, a leading global producer of MIBC with integrated production capabilities and extensive distribution networks. Shell is a major supplier with global reach and technical support capabilities for mining and lubricant applications. ALTIVIA Ketones & Additives LLC is a significant North American producer offering MIBC under its Altivia brand, with a purity of minimum 98.0 wt% and applications in coatings as a latent solvent, viscosity reducer, and solvent for nitrocellulose and ethylcellulose lacquers. Arkema offers MIBC with a purity of ≥98.5% by weight, a density of 0.806–0.808 g/cm³ at 20°C, and applications in lubricant oil additives (ZDDP), flotation frothing for copper and coal mining, and coatings or fine chemistry. Eastman Chemical Company offers MIBC as a colorless chemical compound primarily used in lube oil applications (as a chemical intermediate in the manufacture of ZDDP) and mining operations (as a flotation frother), with smaller volumes used as a coating solvent in nitrocellulose and hot spray lacquers. Solvay and Monument Chemical are also key global producers. Mitsui Chemicals (Japan) serves the Asian market with high-purity MIBC for mining and lubricant applications. These companies offer high-purity MIBC for mining, lubricant, coating, and fine chemical applications, with comprehensive quality documentation and global distribution networks.

In the industrial and large-scale production segment, Chinese manufacturers have emerged as significant players in global supply. XinChem is a reliable manufacturer and supplier of high-purity methyl isobutyl carbinol from China, offering the compound with stringent quality standards for use in mineral flotation, lubricant additive synthesis, latent solvent applications, and other industrial formulations. XinChem provides the compound as a clear, colorless liquid with a mild alcoholic odor, comprehensive quality documentation, batch-specific Certificates of Analysis (COA), customizable packaging, and globally compliant REACH, ISO 9001, and GMP-aligned manufacturing. The company emphasizes that MIBC is a versatile C6 branched alcohol with a unique dual-functionality as a flotation frother and lubricant additive intermediate, suitable for a wide range of industrial applications. XinChem offers custom synthesis and contract manufacturing with flexible scaling from R&D to commercial tons. Other Chinese suppliers are concentrated in major chemical manufacturing regions including Qingdao (Shandong) and other industrial provinces, offering the compound at various purity grades (typically 98% to 99.5%) and packaging options—from 180 kg drums to 1,000 kg IBC containers.

Regional Market Dynamics

The global methyl isobutyl carbinol market exhibits distinct regional characteristics, with production concentrated in Asia-Pacific, North America, and Europe, and consumption distributed according to mining activity, lubricant production, and coating manufacturing.

The Asia-Pacific region is a dominant force in the global MIBC market, driven by extensive mining activities in copper, molybdenum, coal, and polymetallic ore processing. China serves as a significant manufacturing hub, with production capacities concentrated in chemical parks in East China (Shandong, Jiangsu) and North China. The region’s competitive advantages include integrated ketone-alcohol production chains, cost-effective manufacturing, and proximity to rapidly growing mining and industrial activities. Growing mineral resource demand in the region, particularly in China, India, and Southeast Asia, continues to drive MIBC consumption for flotation frothing applications. Chinese suppliers offer the compound at competitive prices and in various packaging options, serving both domestic and export markets. The region’s growing mining and construction sectors support steady demand for MIBC in flotation and lubricant additive applications.

North America is a key market for MIBC, driven by demand from the mining industry (copper, molybdenum, and coal flotation) and lubricant additive manufacturing. The United States hosts major MIBC producers including ALTIVIA Ketones & Additives LLC and Eastman Chemical Company, as well as major lubricant manufacturers and mining operations that require high-quality MIBC for their processes. The region’s well-established regulatory framework, including EPA oversight and OSHA workplace exposure limits, supports demand for high-grade MIBC.

Europe is characterized by stringent regulatory requirements, including REACH registration and Annex XVII restrictions, and a strong focus on environmental compliance in mining and chemical applications. European mining companies and lubricant manufacturers demand high-purity MIBC with comprehensive documentation. The compound is registered under REACH with EINECS number 203-551-7, and supplier SDS documentation references applicable REACH Annex XVII restrictions. Germany, France, and the United Kingdom are key markets in the region. Arkema and Solvay are key producers in Europe.

Japan and South Korea represent specialized markets where MIBC is supplied for high-precision mining, lubricant, and fine chemical applications. Mitsui Chemicals is a key producer in the region.

Regulatory and Safety Considerations

As a flammable branched alcohol with industrial applications in mining, lubricants, and coatings, methyl isobutyl carbinol (CAS# 108-11-2) is subject to regulatory oversight in major global economies. Compliance with relevant regulations is essential for market access and trade.

GHS classification and handling: MIBC is classified with the signal word “Warning”. Hazard statements include H226 (Flammable liquid and vapour), H319 (Causes serious eye irritation), H332 (Harmful if inhaled), and H335 (May cause respiratory irritation). The compound is classified as Flam. Liq. 3, Eye Irrit. 2, Acute Tox. 4 (Inhalation) , and STOT SE 3. Precautionary statements include P210 (Keep away from heat, sparks, open flames, and hot surfaces), P233 (Keep container tightly closed), P240 (Ground and bond container and receiving equipment), P241 (Use explosion-proof electrical equipment), P242 (Use only non-sparking tools), P243 (Take action to prevent static discharges), P261 (Avoid breathing vapours), P264 (Wash skin thoroughly after handling), P271 (Use only outdoors or in a well-ventilated area), P280 (Wear protective gloves, eye protection, and face protection), P303+P361+P353 (IF ON SKIN (or hair): Take off immediately all contaminated clothing; rinse skin with water/shower), P304+P340 (IF INHALED: Remove person to fresh air and keep comfortable for breathing), P305+P351+P338 (IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing), P312 (Call a POISON CENTER or doctor if you feel unwell), P337+P313 (If eye irritation persists: Get medical advice/attention), P370+P378 (In case of fire: Use dry sand, dry chemical, or alcohol-resistant foam to extinguish), P403+P235 (Store in a well-ventilated place; keep cool), P405 (Store locked up), and P501 (Dispose of contents/container to an approved waste disposal plant). The compound should be stored in a cool, ventilated warehouse away from fire and heat sources.

Occupational exposure limits: The vapour may cause respiratory irritation, and exposure may cause effects on the central nervous system. Adequate ventilation and appropriate personal protective equipment are recommended for handling operations. The International Chemical Safety Card identifies MIBC as a flammable liquid and notes that explosive vapor-air mixtures may form above 41°C.

Regulatory compliance: In the United States, MIBC is regulated under TSCA and is subject to OSHA Hazard Communication Standard requirements. The compound does not appear on EPA’s VOC exemption list, which means solvent-side applications remain subject to VOC-control frameworks rather than benefiting from exempt status. In the European Union, the compound is registered under REACH (EINECS 203-551-7) and must comply with CLP classification requirements. Supplier SDS documentation references applicable REACH Annex XVII restrictions. RIFM (Research Institute for Fragrance Materials) has published a fragrance ingredient safety assessment for 4-methyl-2-pentanol, evaluating its safety profile for use in fragrance applications.

Transport information: MIBC is classified as a dangerous good for international transport under UN 2053 (Methyl isobutyl carbinol), Hazard Class 3 (Flammable liquids), Packing Group III. Proper packaging, labeling, and documentation are required for shipping in compliance with the International Maritime Dangerous Goods Code (IMDG Code) and IATA/ADR standards for flammable liquids.

Environmental considerations: MIBC has moderate water solubility (1.7% at 20°C) and is predicted to be readily biodegradable. The compound is not classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB). However, it is a flammable liquid and requires responsible handling and disposal. Its release to the aquatic environment should be minimized through appropriate containment and waste management practices.

Future Outlook

The market outlook for methyl isobutyl carbinol is positive, supported by several key growth drivers across its major application segments. The global MIBC market is projected to grow from USD 1.58 billion in 2025 to USD 2.16 billion by 2033, registering a CAGR of 4%. The global 4-methyl-2-pentanol (MIBC) market size is predicted to grow from USD 196 million in 2025 to USD 256 million in 2032, registering a CAGR of 4.0%. The China MIBC market is projected to reach USD 259 million by 2032, with a CAGR of 3.9% during 2026–2032.

Key growth drivers include:

1. Sustained mineral flotation demand: MIBC’s core function as a flotation frother for copper, molybdenum, coal, and polymetallic ore processing remains the dominant demand driver. Growing global demand for mineral resources, particularly in developing regions with increasing mining activities, supports steady consumption. Its effectiveness in recovering valuable minerals from low-grade ores ensures its continued relevance in the mining sector.
2. Growth in lubricant additive production: The increasing demand for high-performance lubricants, driven by automotive production, industrial machinery, and infrastructure development, supports MIBC consumption as a key intermediate for ZDDP anti-wear additives. The compound’s role in improving the thermal stability and anti-wear performance of lubricant formulations provides a stable second demand pillar.
3. Expansion of coating and latent solvent applications: The growing demand for waterborne coatings and environmentally friendly solvent systems drives consumption of MIBC as a coupling solvent and latent solvent in coating and ink formulations. Its non-HAP classification and moderate evaporation rate position it as a preferred solvent for formulators seeking to balance performance with environmental compliance.
4. Growth in brake fluid and plasticizer precursor applications: The expanding automotive aftermarket and industrial maintenance sectors support demand for MIBC in brake fluid formulations and as a precursor to specialty plasticizers.
5. Localization of mining chemical supply chains in Asia: The growing emphasis on localizing mining chemical supply chains in Asia-Pacific, particularly in China, India, and Southeast Asia, supports regional MIBC production and consumption, improving supply chain efficiency and reducing logistics costs.

Challenges and considerations:

• Flammability and handling requirements: The compound’s classification as a flammable liquid (H226, UN 2053) requires specialized handling, packaging, and shipping procedures that may increase costs. Explosive vapor-air mixtures may form above 41°C.
• Regulatory constraints: MIBC is not on the EPA VOC exemption list in the United States, which exposes solvent-side applications to VOC-control frameworks and may limit its use as a replacement for exempt solvents in certain coating applications. REACH Annex XVII restrictions in the EU also impose compliance costs.
• Competition from alternative frothers: The market faces competition from polyether-based frothers, alcohol-ether frothers, and customized blended frother systems, which are exerting substitution pressure in some mining applications.
• Feedstock price volatility: Fluctuations in the prices of diisobutylene and MIBK, the primary feedstocks for MIBC production, may impact production costs.
• Mature product profile: MIBC is a mature specialty chemical with stable demand foundations rather than a high-growth product. Its future trajectory is more likely to follow a path of stable base demand with selective structural optimization rather than broad expansion.

To succeed in this evolving market landscape, suppliers must focus on product quality (particularly purity and batch-to-batch consistency), supply chain reliability, regulatory compliance, and responsive customer service. Companies that can offer high-purity products, flexible packaging options, and technical support for mining, lubricant, and coating applications will be well-positioned to capture growing demand.

Shanghai XinChem Co., Ltd. (XinChem)

As a world-leading supplier of organic chemicals and specialty alcohols, Shanghai XinChem Co., Ltd. (XinChem) is dedicated to meeting the innovative needs of the mining, lubricant, coatings, and fine chemical industries. Leveraging extensive experience and advanced manufacturing capabilities, XinChem provides high-quality Methyl Isobutyl Carbinol (MIBC, CAS# 108-11-2) to customers worldwide. As a trusted manufacturer and supplier based in China, XinChem combines competitive pricing, reliable supply, and exceptional service to establish itself as a preferred partner for mining companies, lubricant manufacturers, and coating formulators seeking this versatile C6 branched alcohol.

1. Technical Advantages

Advanced Synthesis and Purification Processes
XinChem utilizes state-of-the-art manufacturing facilities and rigorous quality control measures to ensure the purity, consistency, and safety of its MIBC products. The production process incorporates advanced technologies—including the oxonation of diisobutylene followed by hydrogenation, and the hydrogenation of MIBK to MIBC—enabling the delivery of products with purity ≥98.0% (GC), ≥98.5% (GC), and ≥99.5% (GC) to meet diverse application requirements. Strict process control ensures consistent product quality, minimal impurities, and batch-to-batch reproducibility, providing customers with reliable performance in frothing, lubricant additive synthesis, and solvent applications.

Full-Chain Quality Control
The production process strictly adheres to international quality standards, with comprehensive quality control covering raw material sourcing, in-process monitoring, and finished product testing. Each batch is accompanied by a detailed Certificate of Analysis (COA) documenting physical and chemical properties, purity data (GC), density (0.806–0.808 g/cm³ at 20°C), boiling point (131.6–131.7°C), flash point (41°C), water solubility, and impurity profiles. XinChem offers batch-specific COA, customizable packaging, and globally compliant REACH, ISO 9001, and GMP-aligned manufacturing.

2. Product Advantages

High Purity and Consistent Quality
XinChem offers MIBC with purity ≥98.0% (GC), ≥98.5% (GC), and ≥99.5% (GC) available, ensuring optimal performance in mineral flotation, lubricant additive synthesis, and latent solvent applications. The product’s high purity minimizes the risk of unwanted side reactions and foam instability, making it suitable for demanding applications in copper and molybdenum ore flotation, ZDDP synthesis, and coating formulations. The compound is supplied as a clear, colorless liquid with a mild alcoholic odor and consistent physicochemical properties.

Comprehensive Specifications
Key specifications include:

• Molecular Formula: C₆H₁₄O
• Molecular Weight: 102.17 g/mol
• CAS Number: 108-11-2
• EINECS Number: 203-551-7
• Synonyms: 4-Methyl-2-pentanol; 4-Methylpentan-2-ol; Methyl amyl alcohol; Isobutyl methyl carbinol
• Appearance: Clear, colorless liquid
• Odor: Mild alcoholic odor
• Purity: ≥98.0% (GC) / ≥98.5% (GC) / ≥99.5% (GC) available
• Boiling Point: 131.6–131.7°C
• Melting Point: −90°C
• Flash Point: 41°C (closed cup)
• Density: 0.806–0.808 g/cm³ at 20°C
• Water Solubility: 1.7% (mass fraction) at 20°C
• Explosive Limits: 1.0–5.5 vol% in air
• Vapor Density: 3.5 (Air = 1)
• Storage: Store in a cool, ventilated warehouse, away from fire and heat sources
• GHS Classification: Warning; H226, H319, H332, H335
• Transport Classification: UN 2053, Class 3, Packing Group III

Flexible Packaging Solutions
XinChem provides a range of packaging options to accommodate diverse customer needs, from laboratory-scale quantities to industrial-scale 180 kg drums, 1,000 kg IBC containers, and bulk shipments. Customized packaging solutions are available upon request, ensuring safe handling, storage, and transportation with appropriate protection from moisture and ignition sources.

3. Application Fields

As a versatile C6 branched alcohol with dual functionality, Methyl Isobutyl Carbinol (CAS# 108-11-2) exhibits wide application value across multiple industries:

Mineral Flotation:

• Critical frother for selective flotation of copper, molybdenum, coal, and polymetallic ores
• Provides stable, mineral-laden froth for efficient recovery of valuable minerals
• Effective in low-grade ore processing and selective separation of sulfide minerals

Lubricant Additive Synthesis:

• Key intermediate for the production of zinc dialkyldithiophosphate (ZDDP) anti-wear and anti-corrosion additives
• Intermediate for other lubricant additive systems and corrosion inhibitors
• Component in the synthesis of specialty lubricant formulations

Latent Solvent and Coating Applications:

• Coupling solvent for waterborne coatings
• Latent solvent for coatings and inks
• Viscosity reducer and cure-rate modifier in nitrocellulose and hot spray lacquers
• Solvent for dyes, stains, cellulose ethers, ester gums, natural resins, phenolics, and waxes

Other Industrial Applications:

• Manufacture of brake fluids
• Precursor to certain plasticizers
• Fine chemical and specialty chemical synthesis

4. Service Support

Technical Expertise and Customized Solutions
XinChem’s team of experienced chemists and application engineers provides full technical support throughout the customer journey—from product selection and specification development to application guidance and troubleshooting. Whether customers require optimization of frothing performance, guidance on lubricant additive synthesis, or assistance with regulatory documentation, XinChem’s technical experts are ready to help. Custom synthesis and contract manufacturing with flexible scaling from R&D to commercial tons are available upon request.

Global Logistics and Reliable Supply
With established supply chains serving markets across Europe, North America, Asia-Pacific, and beyond, XinChem ensures timely delivery and consistent product availability. The company’s logistics team manages all aspects of international shipping, including compliance with dangerous goods transport regulations (UN 2053, Class 3, PG III), customs clearance, and documentation, with appropriate protection from moisture and ignition sources for product stability.

Regulatory Support
XinChem provides comprehensive documentation to support regulatory compliance, including Safety Data Sheets (SDS), Certificates of Analysis (COA), and other required certificates. The company stays current with evolving regulatory requirements in major markets, including REACH, TSCA, OSHA, and other regional regulations, helping customers navigate the complexities of global trade.

5. Reasons to Choose XinChem

• Professionalism: Extensive experience and deep expertise in specialty alcohol synthesis and supply.
• Quality: Rigorous quality control, high purity (≥98.0% to ≥99.5%), and adherence to international standards.
• Reliability: Stable supply, competitive pricing, and timely delivery.
• Flexibility: Customized solutions to meet diverse customer needs, including custom synthesis and packaging.
• Service: Responsive technical support and comprehensive documentation including batch-specific COA.

Contact us today to start your partnership with XinChem!

Website: www.xinchem.com

Email: sales1@xinchem.com

WhatsApp: +86 18049800532