News

Methyl isobutyl ketone (CAS# 108-10-1), also known as MIBK, 4-methyl-2-pentanone, 4-methylpentan-2-one, isobutyl methyl ketone, hexone, or isopropylacetone, is a colorless, flammable organic ketone with the molecular formula C₆H₁₂O and a molecular weight of 100.16 g/mol. Its molecular structure features a branched isobutyl group attached to a methyl ketone moiety, a branched architecture that confers a unique combination of physical properties: a boiling point of 116.2°C, a flash point of 14°C (closed cup), a density of 0.8017 g/cm³ at 20°C, and a characteristic sweet, camphor-like odor with an odor threshold of approximately 1.6 mg/m³ (0.4 ppm). The compound is a medium-boiling, active solvent for nitrocellulose, cellulose esters, vinyl resins, acrylic resins, epoxy resins, and many natural and synthetic resins. MIBK is produced industrially through a three-step process involving the liquid-phase aldol condensation of acetone to diacetone alcohol (DAA), acid-catalysed dehydration of DAA to mesityl oxide (MO), and hydrogenation of MO to MIBK using Cu or Ni catalysts. More recently, one-step processes over combined solid base/hydrogenation catalysts have been developed. Its unique combination of medium evaporation rate, strong solvency for a broad range of resins, and favorable regulatory profile has established MIBK as a preferred solvent across coatings, printing inks, adhesives, rubber antioxidants, pharmaceuticals, and electronic materials. Based on its chemical characteristics and industrial significance, this article systematically analyzes the key properties, core application areas, global market structure, regulatory landscape, and future outlook of this strategically important ketone solvent.

Key Properties and Reactivity Profile

Methyl isobutyl ketone (CAS# 108-10-1) is a medium-boiling ketone solvent whose value derives from its branched molecular architecture, strong solvency for a broad range of resins, and favorable regulatory profile.

Key physicochemical parameters include:

Molecular Formula: C₆H₁₂O
Molecular Weight: 100.16 g/mol
CAS Number: 108-10-1
EINECS Number: 203-550-1
MDL Number: MFCD00008916
Synonyms: 4-Methyl-2-pentanone; 4-Methylpentan-2-one; Isobutyl methyl ketone; Hexone; Isopropylacetone; MIBK
Appearance: Clear, colorless liquid
Odor: Sweet, camphor-like
Boiling Point: 116.2°C (range 116–119°C)
Melting Point: −80.26°C (range −80 to −85°C)
Flash Point: 14°C (closed cup); 18°C (GHS)
Autoignition Temperature: 460°C
Density: 0.8017 g/cm³ (20°C/4°C)
Refractive Index: 1.395–1.397 (nD20)
Vapor Pressure: 1.99 kPa at 20°C; 16 mmHg
Vapor Density: 3.45 (air = 1)
Explosive Limits: 1.4–7.5 vol% in air
Solubility in Water: 17 g/L (20°C)
Log Pow (octanol/water): 1.38
Odor Threshold: 1.64 mg/m³ (0.4 ppm)
Storage: Store in a cool, ventilated warehouse, away from fire and heat sources; keep container sealed; protect from light
GHS Classification: Danger; H225 (Highly flammable liquid and vapour), H319 (Causes serious eye irritation), H332 (Harmful if inhaled), H335 (May cause respiratory irritation)
Transport Classification: UN 1245, Class 3, Packing Group II

The compound’s reactivity is defined by its ketone functional group, which can undergo nucleophilic addition, condensation, and reduction reactions. The branched isobutyl group provides steric hindrance that moderates reactivity and contributes to the compound’s medium evaporation rate, enabling controlled drying and film formation in coating applications. MIBK can react violently with oxidizing agents such as peroxides, nitrates, and perchlorates, reducing agents, or with potassium tert-butoxide. When heated, MIBK may form peroxides by auto-oxidation, and these may explode spontaneously. The compound is miscible with most organic solvents in all proportions and is an active solvent for a broad spectrum of resins including nitrocellulose, cellulose esters, vinyl resins, acrylic esters, phenolic resins, epoxy resins, and natural resins.

Core Application Fields and Demand

Market demand for methyl isobutyl ketone (CAS# 108-10-1) is concentrated in four primary sectors: coatings and paints (approximately 45–50% of global consumption), rubber antioxidants and industrial applications (approximately 25–30%), pharmaceutical and chemical intermediates (approximately 15–20%), and electronic-grade applications and specialty solvents (approximately 5–10%). Its medium boiling point, strong solvency for a broad range of resins, and versatile reactivity serve as the core drivers of sustained demand growth. The global methyl isobutyl ketone (MIBK) market stood at a volume of approximately 484.10 Kilo Tons in 2025 and is estimated to grow at a CAGR of 3.00% between 2026 and 2035 to reach a volume of about 650.59 Kilo Tons by 2035. The global MIBK market was valued at approximately USD 800 million in 2025 and is projected to reach USD 1,491 million by 2036, growing at a CAGR of 6.0% during the forecast period.

In coatings and paints, MIBK is a key medium-boiling active solvent for nitrocellulose lacquers, acrylic coatings, vinyl resin coatings, and epoxy coatings. Its strong solvency for a wide range of resins enables solutions of low viscosity and high solid content, making it a versatile solvent in automotive finishes, industrial finishes, and protective coatings. MIBK is used extensively in nitrocellulose lacquers for automobile finishes and other lacquer applications including emulsion and hot spray types. With vinyl resins, MIBK is used to formulate lacquer emulsions for paper coatings, textiles, and leathers. The compound’s medium evaporation rate provides optimal flow and leveling, reducing the risk of coating defects such as orange peel and sagging. MIBK is also used in paint removers, varnishes, and lacquers, as well as in adhesives, paper, paperboard, and polymers.

In rubber antioxidants and industrial applications, MIBK is a key feedstock for the production of rubber antioxidant 6PPD (N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine), which is produced via reductive alkylation of p-aminodiphenylamine with MIBK. 6PPD functions as a powerful antioxidant and antiozonant for natural and synthetic elastomeric compounds and as a synthetic polymer stabilizer, providing protection against different forms of aging and fatigue degradation of flexible rubber. MIBK is also used as an extraction solvent for antibiotics and other pharmaceuticals, for metal separation in rare-metal extraction (including uranium from fission products), and for dewaxing mineral oils. The compound is also used as a denaturant for rubbing alcohol, as a synthetic flavoring adjuvant, and as a fruit flavoring agent. Other uses include dry-cleaning preparations, limited reported usage in cosmetics, and in the synthesis of methyl isobutyl carbinol (MIBC).

In pharmaceutical and chemical intermediates, MIBK is used as a solvent in pharmaceutical manufacturing, including as a crystallization solvent and extraction solvent for antibiotics. It is also used in the production of synthetic leather, aluminium foil, and transparent paper. MIBK is a valuable chemical intermediate for the synthesis of various plastics and resins.

In electronic-grade applications and specialty solvents, high-purity electronic-grade MIBK is used in semiconductor manufacturing processes, including cleaning of liquid crystal panels and semiconductor components, effective removal of photoresists and precision grease, and as a resist solvent. Electronic-grade MIBK is a high-purity organic compound designed for high-precision applications in the electronics industry, such as electronic component cleaning and semiconductor manufacturing. The global electronic-grade MIBK market reached USD 2.11 billion in 2025 and is projected to reach USD 2.76 billion by 2032, growing at a CAGR of 4.0% from 2026 to 2032.

Major Market Participants

The global supply system for methyl isobutyl ketone (CAS# 108-10-1) features a pattern of “integrated chemical corporations, specialized ketone manufacturers, and Chinese producers serving distinct market segments.” The global market is characterized by a mix of large chemical corporations and regional producers, with the top five players holding approximately 50% of the global market share.

In the global high-purity and branded segment, key international suppliers include Sasol Ltd. (South Africa), the market leader in MIBK, accounting for the largest market share. Royal Dutch Shell Plc. , Kumho P&B Chemicals Inc. (South Korea), The Dow Chemical Company, Mitsui Chemicals Inc. (Japan), Celanese Mexicana S.A. , and Monument Chemical are also key global producers. Sasol offers MIBK under its Sasol Solvents brand, with a purity of 99% and specifications including a boiling point of 116.2°C, flash point of 14°C, and water solubility of 17 g/L. Monument Chemical serves the specialty hydrocarbon industry with MIBK for coatings, paints for vehicles, silk screen inks, and electronics applications. Sigma-Aldrich (Merck) offers MIBK (ACS reagent, ≥99.5%) under catalog number W296000 and MIBK (CHROMASOLV, for HPLC, ≥99.5%) under catalog number 360511. Thermo Fisher Scientific offers MIBK (99+%, extra pure) under catalog number A12628 and MIBK (99.5%, for analysis) under catalog number A12628. Tokyo Chemical Industry (TCI) offers MIBK under product code M0400. These companies offer high-purity MIBK for coatings, inks, adhesives, rubber, pharmaceutical, and electronic applications, with comprehensive quality documentation and global distribution networks.

In the industrial and large-scale production segment, Chinese manufacturers have emerged as a dominant force in global supply. China’s MIBK production capacity reached 600,000 tons/year in 2025, accounting for approximately 40% of the global total, concentrated in chemical parks in East China (Jiangsu, Shandong) and North China. XinChem is a reliable manufacturer and supplier of high-purity MIBK from China, offering the compound with stringent quality standards for use in coatings, printing inks, adhesives, rubber antioxidants, pharmaceutical intermediates, and electronic-grade applications. XinChem provides the compound with comprehensive quality documentation, batch-specific Certificates of Analysis (COA), customizable packaging, and globally compliant REACH, ISO 9001, and GMP-aligned manufacturing. The company emphasizes that MIBK is a versatile medium-boiling ketone solvent with strong solvency for a broad range of resins, a balanced evaporation rate, and a favorable environmental profile, suitable for a wide range of industrial and consumer applications. XinChem offers custom synthesis and contract manufacturing with flexible scaling from R&D to commercial tons. Other Chinese suppliers are concentrated in major chemical manufacturing regions including Jiangsu, Shandong, and Zhejiang provinces, offering the compound at various purity grades (typically 99.0% to 99.9%) and packaging options—from 180 kg drums to 1,000 kg IBC containers. China’s MIBK market has transitioned from a net importer to a net exporter, with export volumes exceeding 80,000 tons in 2025, primarily to Southeast Asia, South America, Thailand, India, Vietnam, South Korea, and Indonesia. Chinese suppliers offer the compound at prices ranging from approximately RMB 6,800 per ton (December 2025 low) to RMB 13,600 per ton (September 2026), with an annual average price of RMB 8,365 per ton in 2025.

Regional Market Dynamics

The global methyl isobutyl ketone market exhibits distinct regional characteristics, with production concentrated in Asia-Pacific (particularly China) and consumption distributed across North America, Europe, and the Asia-Pacific region, aligned with the coatings, rubber, pharmaceutical, and electronic industries in these regions.

The Asia-Pacific region is the dominant force in the global MIBK market, holding more than 50% of global production capacity and accounting for more than one-third of global consumption. China serves as the world’s manufacturing hub, with production capacity reaching 600,000 tons/year in 2025 (approximately 40% of the global total). The region’s competitive advantages include integrated acetone and hydrogen supply chains, cost-effective production, and proximity to rapidly growing coatings, rubber, and electronics industries. Asia’s MIBK capacity reached approximately 415,000 tons/year, with China’s capacity at approximately 265,000 tons/year. Chinese suppliers offer the compound at competitive prices and in various packaging options, serving both domestic and export markets. The growing coatings, rubber, and consumer products sectors in China, India, and Southeast Asia continue to drive regional consumption growth. China is expected to remain the key producer of MIBK, with capacity expansion continuing to meet domestic and export demand.

North America remains a key market for high-purity MIBK, driven by demand from the coatings, rubber antioxidant, and pharmaceutical industries. The United States hosts major coatings manufacturers, rubber producers, and pharmaceutical companies that require high-quality ketone solvents for their operations. The Dow Chemical Company and Eastman Chemical Company are key producers in the region. The region’s well-established regulatory framework, including EPA oversight of solvent emissions and OSHA workplace exposure limits, supports demand for high-grade MIBK.

Europe is characterized by stringent regulatory requirements, including REACH registration and VOC emission limits, and a strong focus on sustainability in coatings and industrial applications. European coatings manufacturers and rubber producers demand high-purity MIBK with comprehensive documentation. The compound is registered under REACH with EINECS number 203-550-1. Germany, France, and the United Kingdom are key markets in the region. Shell Nederland Chemie B.V. is a key producer in Europe. The European region has MIBK capacity of approximately 200,000 tons/year, with production of approximately 160,000 tons/year.

Japan and South Korea represent specialized markets where MIBK is supplied for high-precision coatings, electronics materials, and specialty inks. Mitsui Chemicals and Kumho P&B Chemicals are key producers in the region.

Regulatory and Safety Considerations

As a flammable ketone solvent with industrial applications in coatings, inks, rubber, pharmaceuticals, and electronics, methyl isobutyl ketone (CAS# 108-10-1) is subject to regulatory oversight in major global economies. Compliance with relevant regulations is essential for market access and trade.

GHS classification and handling: MIBK is classified with the signal word ”Danger”. Hazard statements include H225 (Highly flammable liquid and vapour), H319 (Causes serious eye irritation), H332 (Harmful if inhaled), and H335 (May cause respiratory irritation). The compound is classified as Flam. Liq. 2, Eye Irrit. 2, Acute Tox. 4 (Inhalation) , and STOT SE 3. Precautionary statements include P210 (Keep away from heat, sparks, open flames, and hot surfaces), P233 (Keep container tightly closed), P240 (Ground and bond container and receiving equipment), P241 (Use explosion-proof electrical equipment), P242 (Use only non-sparking tools), P243 (Take action to prevent static discharges), P261 (Avoid breathing vapours), P264 (Wash skin thoroughly after handling), P271 (Use only outdoors or in a well-ventilated area), P280 (Wear protective gloves, eye protection, and face protection), P303+P361+P353 (IF ON SKIN (or hair): Take off immediately all contaminated clothing; rinse skin with water/shower), P304+P340 (IF INHALED: Remove person to fresh air and keep comfortable for breathing), P305+P351+P338 (IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing), P312 (Call a POISON CENTER or doctor if you feel unwell), P337+P313 (If eye irritation persists: Get medical advice/attention), P370+P378 (In case of fire: Use dry sand, dry chemical, or alcohol-resistant foam to extinguish), P403+P235 (Store in a well-ventilated place; keep cool), P405 (Store locked up), and P501 (Dispose of contents/container to an approved waste disposal plant). The compound should be stored in a cool, ventilated warehouse away from fire and heat sources.

Occupational exposure limits: OSHA PEL is 100 ppm (410 mg/m³) as TWA. NIOSH REL is 50 ppm (205 mg/m³) as TWA and 75 ppm (300 mg/m³) as STEL. ACGIH TLV is 50 ppm (205 mg/m³) as TWA. The vapour may cause respiratory irritation, and exposure may cause effects on the central nervous system. The compound has an NFPA health rating of 2, fire rating of 3, and reactivity rating of 1.

Regulatory compliance: In the United States, MIBK is regulated under TSCA and is subject to OSHA Hazard Communication Standard requirements. The compound has an FDA UNII of U5T7B88CNP. In the European Union, the compound is registered under REACH (EINECS 203-550-1) and must comply with CLP classification requirements. The compound is classified as a Cramer Class I substance (low concern) and is listed on the EU flavouring substances register. In China, MIBK is regulated as a hazardous chemical and must comply with GB 13690-2009 and GB 30000 series standards. The compound has a Chinese HS code of 2914130000.

Transport information: MIBK is classified as a dangerous good for international transport under UN 1245 (Methyl isobutyl ketone), Hazard Class 3 (Flammable liquids), Packing Group II. Proper packaging, labeling, and documentation are required for shipping in compliance with the International Maritime Dangerous Goods Code (IMDG Code) and IATA/ADR standards for flammable liquids. The compound has a TARIC code of 2914 13 00.

Environmental considerations: MIBK has a log Pow of 1.38, indicating low bioaccumulation potential. The compound is not classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB). However, it is a flammable liquid and requires responsible handling and disposal. MIBK can react violently with oxidizing agents, reducing agents, or potassium tert-butoxide, and may form explosive peroxides upon auto-oxidation when heated.

Future Outlook

The market outlook for methyl isobutyl ketone is positive, supported by several key growth drivers across its major application segments. The global MIBK market is projected to grow from USD 800 million in 2025 to USD 1,491 million by 2036, registering a CAGR of 6.0%. The global MIBK market volume is estimated to grow at a CAGR of 3.00% between 2026 and 2035 to reach approximately 650.59 Kilo Tons by 2035.

Key growth drivers include:

Expansion of the coatings and adhesives industries: The growing global demand for architectural coatings, automotive finishes, and industrial adhesives drives consumption of MIBK as a medium-boiling active solvent. Around 50% of total MIBK produced globally is consumed as a solvent, with primary end uses in cellulose-based and resin-based coatings and adhesives. The Asia-Pacific region, particularly China and India, is the fastest-growing market for these applications.
Growth in rubber antioxidant production: MIBK is a key feedstock for the production of rubber antioxidant 6PPD, which is essential for tire manufacturing and rubber products. The growing global demand for tires, driven by automotive production and infrastructure development, supports steady demand for MIBK. China’s rubber antioxidant production reached 459,800 tons in 2025, providing a stable demand base for MIBK.
Expansion of electronic-grade applications: The growing semiconductor and electronics industries drive demand for high-purity electronic-grade MIBK for use in semiconductor cleaning, photoresist stripping, and liquid crystal panel manufacturing. Electronic-grade MIBK, although accounting for less than 8% of total MIBK consumption, is growing at an annual rate of over 12%, becoming a high-value-added core growth point.
Growth in pharmaceutical and chemical intermediate applications: The increasing use of MIBK as an extraction solvent for antibiotics and other pharmaceuticals, as well as its use in the production of synthetic leather, aluminium foil, and transparent paper, supports demand from the pharmaceutical and chemical sectors.
Shift toward high-purity and sustainable solvents: The coatings and electronics industries are increasingly prioritizing high-purity and environmentally friendly solvents to minimize environmental impact and enhance product performance. MIBK’s favorable toxicological profile and high-purity grades position it as a preferred solvent for demanding applications.

Challenges and considerations:

Flammability and handling requirements: The compound’s classification as a highly flammable liquid (H225, UN 1245) requires specialized handling, packaging, and shipping procedures that may increase costs. MIBK may form explosive peroxides upon auto-oxidation.
Feedstock price volatility: Fluctuations in the prices of acetone and hydrogen, the primary feedstocks for MIBK production, may impact production costs. In 2025, MIBK prices in China averaged RMB 8,365 per ton, a decrease of 35.65% year-on-year, driven by declining acetone prices.
Competition from alternative solvents: The market faces competition from other ketone solvents, including methyl ethyl ketone (MEK) and methyl amyl ketone (MAK), as well as bio-based solvents.
Regulatory compliance: Increasingly stringent VOC emission regulations and workplace exposure limits may require ongoing investment in solvent recovery and emission control systems.
Supply-demand dynamics: China’s MIBK market has transitioned from a net importer to a net exporter, with export volumes exceeding 80,000 tons in 2025. This shift has created a more balanced global supply-demand landscape but has also increased competitive pressure on traditional producers.

To succeed in this evolving market landscape, suppliers must focus on product quality (particularly purity and batch-to-batch consistency), supply chain reliability, regulatory compliance, and responsive customer service. Companies that can offer high-purity products, flexible packaging options, and technical support for coating, rubber, pharmaceutical, and electronic applications will be well-positioned to capture growing demand.

Shanghai XinChem Co., Ltd. (XinChem)

As a world-leading supplier of organic chemicals and ketone solvents, Shanghai XinChem Co., Ltd. (XinChem) is dedicated to meeting the innovative needs of the coatings, printing inks, rubber, pharmaceutical, and electronics industries. Leveraging extensive experience and advanced manufacturing capabilities, XinChem provides high-quality Methyl Isobutyl Ketone (MIBK, CAS# 108-10-1) to customers worldwide. As a trusted manufacturer and supplier based in China, XinChem combines competitive pricing, reliable supply, and exceptional service to establish itself as a preferred partner for coatings manufacturers, rubber producers, pharmaceutical companies, and electronic materials suppliers seeking this versatile medium-boiling ketone solvent.

1. Technical Advantages

Advanced Synthesis and Purification Processes
XinChem utilizes state-of-the-art manufacturing facilities and rigorous quality control measures to ensure the purity, consistency, and safety of its MIBK products. The production process incorporates advanced technologies—including the three-step acetone-to-MIBK process (aldol condensation, dehydration, and hydrogenation) as well as one-step catalytic processes over combined solid base/hydrogenation catalysts—enabling the delivery of products with purity ≥99.0% (GC), ≥99.5% (GC), and ≥99.9% (GC) to meet diverse application requirements. Strict process control ensures consistent product quality, minimal impurities (dimethyl heptane <0.3%, water <0.1%, methyl isobutyl carbinol <0.06%, mesityl oxide <0.03%), and batch-to-batch reproducibility, providing customers with reliable performance in coating, rubber, pharmaceutical, and electronic formulations.

Full-Chain Quality Control
The production process strictly adheres to international quality standards, with comprehensive quality control covering raw material sourcing, in-process monitoring, and finished product testing. Each batch is accompanied by a detailed Certificate of Analysis (COA) documenting physical and chemical properties, purity data (GC), density (0.8017 g/cm³), boiling point (116.2°C), flash point (14°C), water content (Karl Fischer), and impurity profiles. XinChem offers batch-specific COA, customizable packaging, and globally compliant REACH, ISO 9001, and GMP-aligned manufacturing.

2. Product Advantages

High Purity and Consistent Quality
XinChem offers MIBK with purity ≥99.0% (GC), ≥99.5% (GC), and ≥99.9% (GC) available, ensuring optimal performance in coatings, printing inks, rubber antioxidants, pharmaceutical intermediates, and electronic-grade applications. The product’s high purity minimizes the risk of unwanted side reactions and coating defects, making it suitable for demanding applications in automotive coatings, flexible packaging inks, pharmaceutical crystallization, and semiconductor cleaning. The compound is supplied as a clear, colorless liquid with a sweet, camphor-like odor and consistent physicochemical properties.

Comprehensive Specifications
Key specifications include:

Molecular Formula: C₆H₁₂O
Molecular Weight: 100.16 g/mol
CAS Number: 108-10-1
EINECS Number: 203-550-1
Synonyms: 4-Methyl-2-pentanone; Isobutyl methyl ketone; Hexone; Isopropylacetone
Appearance: Clear, colorless liquid
Odor: Sweet, camphor-like
Purity: ≥99.0% (GC) / ≥99.5% (GC) / ≥99.9% (GC) available
Boiling Point: 116.2°C
Melting Point: −80.26°C
Flash Point: 14°C (closed cup)
Density: 0.8017 g/cm³ (20°C/4°C)
Refractive Index: 1.395–1.397 (nD20)
Vapor Pressure: 1.99 kPa at 20°C
Solubility in Water: 17 g/L (20°C)
Log Pow: 1.38
Storage: Store in a cool, ventilated warehouse, away from fire and heat sources
GHS Classification: Danger; H225, H319, H332, H335
Transport Classification: UN 1245, Class 3, Packing Group II

Flexible Packaging Solutions
XinChem provides a range of packaging options to accommodate diverse customer needs, from laboratory-scale quantities to industrial-scale 180 kg drums, 1,000 kg IBC containers, and bulk shipments. Customized packaging solutions are available upon request, ensuring safe handling, storage, and transportation with appropriate protection from moisture and ignition sources.

3. Application Fields

As a versatile medium-boiling ketone solvent, Methyl Isobutyl Ketone (CAS# 108-10-1) exhibits wide application value across multiple industries:

Coatings and Paints:

Key medium-boiling active solvent for nitrocellulose lacquers, acrylic coatings, vinyl resin coatings, and epoxy coatings
Strong solvency for cellulose esters, vinyl resins, phenolic resins, and natural resins
Used in automotive finishes, industrial finishes, and protective coatings
Component in paint removers, varnishes, and lacquers
Solvent for adhesives, paper, paperboard, and polymers

Rubber Antioxidants and Industrial Applications:

Key feedstock for the production of rubber antioxidant 6PPD
Extraction solvent for antibiotics and other pharmaceuticals
Metal separation in rare-metal extraction (including uranium from fission products)
Dewaxing of mineral oils and purification of chemicals
Denaturant for rubbing alcohol and synthetic flavoring adjuvant

Pharmaceutical and Chemical Intermediates:

Solvent in pharmaceutical manufacturing, including crystallization and extraction
Production of synthetic leather, aluminium foil, and transparent paper
Intermediate in the production of various plastics and resins
Synthesis of methyl isobutyl carbinol (MIBC)

Electronic-Grade Applications:

Cleaning of liquid crystal panels and semiconductor components
Removal of photoresists and precision grease
Resist solvent in semiconductor manufacturing

4. Service Support

Technical Expertise and Customized Solutions
XinChem’s team of experienced chemists and application engineers provides full technical support throughout the customer journey—from product selection and specification development to application guidance and troubleshooting. Whether customers require optimization of solvent blends, guidance on evaporation rate adjustment, or assistance with regulatory documentation, XinChem’s technical experts are ready to help. Custom synthesis and contract manufacturing with flexible scaling from R&D to commercial tons are available upon request.

Global Logistics and Reliable Supply
With established supply chains serving markets across Europe, North America, Asia-Pacific, and beyond, XinChem ensures timely delivery and consistent product availability. The company’s logistics team manages all aspects of international shipping, including compliance with dangerous goods transport regulations (UN 1245, Class 3, PG II), customs clearance, and documentation, with appropriate protection from moisture and ignition sources for product stability.

Regulatory Support
XinChem provides comprehensive documentation to support regulatory compliance, including Safety Data Sheets (SDS), Certificates of Analysis (COA), and other required certificates. The company stays current with evolving regulatory requirements in major markets, including REACH, TSCA, OSHA, and other regional regulations, helping customers navigate the complexities of global trade.

5. Reasons to Choose XinChem

Professionalism: Extensive experience and deep expertise in ketone solvent synthesis and supply.
Quality: Rigorous quality control, high purity (≥99.0% to ≥99.9%), and adherence to international standards.
Reliability: Stable supply, competitive pricing, and timely delivery.
Flexibility: Customized solutions to meet diverse customer needs, including custom synthesis and packaging.
Service: Responsive technical support and comprehensive documentation including batch-specific COA.

Website: www.xinchem.com

Email: sales1@xinchem.com

WhatsApp: +86 18049800532

Post time: Oct-14-2026

The Medium-Boiling Ketone Solvent Driving Coatings, Rubber Antioxidants, and Electronic-Grade Applications: Methyl Isobutyl Ketone (MIBK, CAS# 108-10-1)