N-[2-Methyl-4-(oxiranylmethoxy)phenyl]-N-(oxiranylmethyl)oxiranemethanamine（CAS#110656-67-2）

I. Basic Identification Information
Full Chemical Name‌: 1,3,5-Triglycidyl Isocyanurate (Low Melting Point Modified Type)
CAS Number‌: 110656-67-2
Core Properties‌: Alicyclic trifunctional epoxy curing agent, colorless to light yellow transparent liquid at room temperature, density 1.42±0.06 g/cm³, boiling point 497.4±45.0 °C, epoxy equivalent about 105-110 g/eq, specially developed for low-temperature curing powder coatings and water-based epoxy systems
II. Clarified Safety Operation Requirements
Storage Safety‌: Seal and store in a cool, dry, dark area below 25°C, keep away from heat sources, open flames and strong oxidizing substances, avoid long-term storage that may cause self-polymerization and gelation of epoxy groups
Operation Protection‌: Wear chemical-resistant nitrile gloves, goggles, gas mask and anti-corrosion protective clothing during operation, work in a fume hood to prevent liquid splashing from contacting skin and eyes, and avoid vapor inhalation
III. Confirmed Potential Risk Warnings
Skin Sensitization Risk‌: Retains the sensitization characteristics of TGIC substances (H317). Repeated contact can easily induce allergic dermatitis and intractable skin pruritus, and sensitive people may have allergic reactions after a single contact
Strong Irritation Damage Risk‌: Direct contact of the liquid with eyes will cause severe irritation. Failure to handle it in time may cause corneal damage and vision loss
Inhalation Irritation Risk‌: The vapor generated by high-temperature volatilization will irritate the respiratory tract, causing cough and throat discomfort. Long-term unprotected inhalation may cause chronic inflammation of the respiratory tract
High Temperature Decomposition Risk‌: When heated above the decomposition temperature, it will release toxic fumes containing nitrogen oxides and cyanides, which can cause poisoning after inhalation
IV. Emergency Disposal and Supplementary Note
In case of skin contact, immediately rinse with plenty of clean water and soap water. If the liquid splashes into eyes accidentally, rinse with running water for more than 15 minutes and seek medical attention in time; if inhaled accidentally, immediately move to fresh air, and seek medical attention immediately when breathing discomfort occurs
The existing public information does not fully cover the UN dangerous goods number, complete acute toxicity data and other core safety parameters of this modified chemical. It is recommended to request the complete MSDS safety technical specification for this batch of products from the supplier to obtain compliant full-dimensional safety risk information