page_banner

product

2-Morpholinoethanol(CAS#622-40-2)

Chemical Property:

Molecular Formula C6H13NO2
Molar Mass 131.17
Density 1.083g/mLat 25°C(lit.)
Melting Point -1 °C
Boling Point 227°C757mm Hg(lit.)
Flash Point 211°F
Water Solubility miscible
Vapor Presure 2.44-7Pa at 20-25℃
Appearance Liquid
Color Clear colorless to yellow
BRN 104375
pKa 14.88±0.10(Predicted)
PH 10.7 (100g/l, H2O, 20℃)
Storage Condition Keep in dark place,Sealed in dry,Room Temperature
Explosive Limit 1.5-9.8%(V)
Refractive Index n20/D 1.476(lit.)
Physical and Chemical Properties The boiling point of 227 deg C (100.9kPa), the relative density of 1.0710(20/4 deg C), the refractive index of 1.4763. Flash point 99 °c. Soluble in water and ethanol.

Product Detail

Product Tags

Hazard Symbols Xi – Irritant
Risk Codes 36/37/38 – Irritating to eyes, respiratory system and skin.
Safety Description S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 – Wear suitable protective clothing.
S37/39 – Wear suitable gloves and eye/face protection
WGK Germany 1
RTECS QE3510000
FLUKA BRAND F CODES 10-23
TSCA Yes
HS Code 29349990

 

Introduction

Properties:N-(2-hydroxyethyl)morpholine is a colorless to pale yellow liquid with characteristic amine and alcohol properties. It is somewhat soluble in water and soluble in most organic solvents.Uses:N-(2-hydroxyethyl)morpholine is commonly used in organic synthesis as a catalyst, reagent, or solvent. It is mainly used in esterification, acylation, and amidation reactions, helping to increase reaction rates and yields.Preparation:There are two main methods for preparing N-(2-hydroxyethyl)morpholine:1. Reacting morpholine with 2-chloroethanol to obtain N-(2-hydroxyethyl)morpholine.2. Reacting sodium hydroxide with 2-chloroethanol in the presence of hydrochloric acid to obtain N-(2-hydroxyethyl)morpholine.Safety Information:N-(2-hydroxyethyl)morpholine is not highly toxic under normal usage conditions. However, as an organic compound, it has certain corrosive and irritating properties. Protective gloves, goggles, and clothing should be worn during handling to avoid skin and eye contact. Also, it is important to avoid contact with strong oxidizers and flammable materials to prevent hazards.


  • Previous:
  • Next:

  • Write your message here and send it to us