page_banner

product

3,4-Epoxycyclohexylmethyl acrylate(CAS#64630-63-3)

Chemical Property:

64630-63-3 - Names and Identifiers

Name 7-oxabicyclo[4.1.0]hept-3-ylmethyl prop-2-enoate
Synonyms 3,4-Epoxy-CycloheylMethyl-Acrylate
3,4-Epoxycyclohexylmethyl acrylate
3,4-Epoxy-Cycloheylmethyl-Acrylate
7-Oxabicyclo[4.1.0]hept-3-ylmethyl acrylate
7-Oxabicyclo[4.1.0]heptan-3-ylmethyl acrylate
7-oxabicyclo[4.1.0]hept-3-ylmethyl prop-2-enoate
7-oxabicyclo[4.1.0]heptan-4-ylmethyl prop-2-enoate
2-Propenoic acid, 7-oxabicyclo4.1.0hept-3-ylmethyl ester
(3,4-Epoxycyclohexyl)methyl Acrylate (stabilized with HQ)
2-propenoic acid, 7-oxabicyclo[4.1.0]hept-3-ylmethyl ester
CAS 64630-63-3

64630-63-3 - Physico-chemical Properties

Molecular Formula C10H14O3
Molar Mass 182.22
Density 1.101±0.06 g/cm3(Predicted)
Boling Point 104 °C(Press: 2.4 Torr)
Flash Point 102.034°C
Vapor Presure 0.014mmHg at 25°C
Appearance clear liquid
Color Colorless to Light orange to Yellow
Storage Condition under inert gas (nitrogen or Argon) at 2-8°C
Refractive Index 1.485

Product Detail

Product Tags

64630-63-3 – Introduction
3,4-Epoxycyclohexylmethyl methacrylate is an organic compound. The following is an introduction to its properties, uses, preparation methods, and safety information:

Properties:

  • 3,4-Epoxycyclohexylmethyl methacrylate is a colorless liquid and is volatile at room temperature.
  • It has low viscosity and high reactivity.
  • This compound is stable in air, but it can react with oxygen.
  • It can undergo addition reactions with unsaturated compounds catalyzed by acids, bases, and catalysts.

Uses:

  • 3,4-Epoxycyclohexylmethyl methacrylate is used as an intermediate in chemical synthesis.
  • It is widely used in the preparation of polymeric materials with various properties, such as coatings, adhesives, and plastics.
  • It can also be used to prepare photosensitive materials, block copolymers, liquid crystal polymers, and the like.

Preparation:

  • 3,4-Epoxycyclohexylmethyl methacrylate can be prepared through an epoxidation reaction. A common method is to react cyclohexene with an epoxidizing agent (such as ethyl peroxy silicate), and then react the epoxy group with methacrylic acid or a methacrylate to obtain the target product.

Safety Information:

  • 3,4-Epoxycyclohexylmethyl methacrylate should be handled in a well-ventilated area to avoid inhaling vapor or mist.
  • It is a flammable liquid and should be kept away from ignition sources and high temperatures.
  • During storage, avoid contact with oxidizing agents and acidic substances to prevent unintended reactions.
  • When using or handling this compound, wear protective gloves, goggles, and appropriate protective clothing.

  • Previous:
  • Next:

  • Write your message here and send it to us