3,4-Epoxycyclohexyl methyl methacrylate（CAS#82428-30-6）

82428-30-6 – Introduction
3,4-Epoxy-3-cyclohexylmethyl isobutylene ester. Below is an overview of the properties, applications, synthesis methods, and safety information for this compound:

Properties:
3,4-Epoxy-3-cyclohexylmethyl isobutylene ester is a colorless liquid with a distinctive odor. It has low volatility, is soluble in organic solvents such as alcohols and ethers, but insoluble in water.

Applications:
This compound is primarily used in industrial applications including coatings, resins, and adhesives. It serves as a key component in UV-curable resins, offering excellent resistance to chemicals, heat, and wear. It is commonly employed in the production of automotive coatings, architectural coatings, and adhesives.

Synthesis:
3,4-Epoxy-3-cyclohexylmethyl isobutylene ester can be prepared by carrying out an ester exchange reaction between 3,4-epoxy-3-cyclohexylmethyl methacrylate and isobutylene alcohol in the presence of an alcoholic solvent. Reaction temperature and duration influence both yield and selectivity.

Safety Information:
3,4-Epoxy-3-cyclohexylmethyl isobutylene ester is relatively safe under normal conditions of use, but the following precautions should still be observed:
- Avoid inhalation, ingestion, or skin contact. Wear appropriate protective gloves, goggles, and a face mask when handling.
- In case of accidental contact with skin or eyes, rinse immediately with plenty of water and seek medical attention if necessary.
- Store in tightly sealed containers, away from sources of ignition and oxidizing agents.
- Ensure adequate ventilation during use.
Before conducting any chemical experiments or operations, thoroughly understand the characteristics and safety requirements of this compound