page_banner

product

Ethyl Anisate(cas#94-30-4)

Chemical Property:

94-30-4 - Names and Identifiers

94-30-4 - Physico-chemical Properties

Molecular Formula C10H12O3
Molar Mass 180.2
Density 1.103g/mLat 25°C(lit.)
Melting Point 7-8°C(lit.)
Boling Point 263°C(lit.)
Flash Point >230°F
JECFA Number 885
Vapor Presure 0.000846mmHg at 25°C
Appearance clear liquid
Color Colorless liquid
Odor fruity,anise odor
BRN 2209700
Storage Condition Sealed in dry,Room Temperature
Refractive Index n20/D 1.524(lit.)
MDL MFCD00015151
Physical and Chemical Properties Colorless to yellowish liquid with light fruit and fennel aromas. Melting point 7~8 ℃; Boiling point 270 ℃; Flash point above 100 ℃. Soluble in ethanol, ether and chloroform, slightly soluble in water.

94-30-4 - Risk and Safety

Safety Description 24/25 – Avoid contact with skin and eyes.
WGK Germany 2
RTECS BZ4697000
TSCA Yes
HS Code 29189900
Toxicity LD50 orl-rat: 2040 mg/kg FCTXAV 14,659,76

94-30-4 - Reference Information

FEMA 2420 | ETHYL P-ANISATE
NIST chemical information information provided by: webbook.nist.gov (external link)
EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
assay was determined by method one in the ester assay (OT-18). The amount of the sample was 1.2g. The equivalence factor (e) in the calculation is taken as 90.10. Or according to GT-10-4 using non-polar column method.
toxicity GRAS(FEMA). LD50 2040 mg/kg (rat, oral).
usage limit FEMA(mg/kg): Soft drink 2.6; Cold drink 0.96; Candy 8.8; Baked goods 7.2. Moderate limits (FDA § 172.515,2000).
Use GB 2760-1996 permitted use of flavorants. Mainly used for the preparation of anise, fennel, licorice and other type flavor.
production method is obtained by esterification of p-methoxybenzoic acid and ethanol under acid catalysis.
category flammable liquid
toxicity grade poisoning
Acute toxicity oral-rat LD50: 2040 mg/kg
flammability hazard characteristics flammable; Combustion-induced irritating smoke
storage and transportation characteristics warehouse ventilation and low temperature drying
fire extinguishing agent dry powder, foam, sand, carbon dioxide, water mist

Product Detail

Product Tags

94-30-4 – Introduction

Ethyl 4-methoxybenzoate is an organic compound. The following is an introduction to its properties, applications, preparation methods, and safety information.

Properties:

  • Appearance: Ethyl 4-methoxybenzoate is a colorless liquid.
  • Odor: It has an aromatic odor.
  • Solubility: It is soluble in organic solvents such as ethanol, diethyl ether, and dichloromethane.

Applications:

Ethyl 4-methoxybenzoate has a wide range of applications in chemical research and industry, including:

  • Used as a raw material in the fragrance and flavor industry to enhance the aroma and flavor of products.
  • Used as a solvent in certain chemical reactions.

Preparation:

Ethyl 4-methoxybenzoate can be prepared through methods such as esterification and condensation reactions. One commonly described method involves reacting benzoic acid with methanol in the presence of an acidic catalyst, such as sulfuric acid, followed by a condensation reaction with acetic anhydride to obtain the target product.

Safety Information:

When handling ethyl 4-methoxybenzoate, the following safety precautions should be observed:

  • The compound is combustible. Avoid contact with open flames and strong oxidizing agents.
  • Avoid inhalation of its vapors and use appropriate ventilation during handling.
  • In case of contact, wash the affected area immediately with plenty of water and soap.

The above provides only basic information about ethyl 4-methoxybenzoate. For detailed handling and use instructions, please refer to relevant safety manuals and chemical literature.


  • Previous:
  • Next:

  • Write your message here and send it to us