7-oxabicyclo[4.1.0]hept-3-ylmethyl prop-2-enoate（CAS#64630-63-3）

结合你此前持续将各类环氧类化工产品的安全风险资料翻译成英文、用于外贸合规文档的背景，以下是适配化工贸易场景的标准英文译文：

I. Basic Identification Information
Full Chemical Name‌: 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexanecarboxylate
CAS Number‌: 64630-63-3
Core Properties‌: Bifunctional alicyclic epoxy resin, colorless transparent low-viscosity liquid at room temperature, density 1.17 g/cm³, boiling point 374°C, flash point 163°C, epoxy equivalent about 130 g/eq, the mainstream base monomer for UV cationic curing systems and high-temperature resistant insulating potting compounds
II. Clarified Safety Operation Requirements
Storage Safety‌: Seal and store in a cool, dry, ventilated area below 30°C, keep away from heat sources, open flames and strong oxidizing substances. Avoid co-storage with amines and strong acids which may cause premature ring-opening polymerization
Operation Protection‌: Wear chemical-resistant nitrile gloves, goggles and ordinary protective masks during operation. Working in a normal ventilated environment is sufficient. Prevent liquid splashing from contacting skin and eyes, and avoid prolonged massive inhalation of volatile vapors
III. Confirmed Potential Risk Warnings
Low Irritation Risk‌: Classified as a low-irritation epoxy compound with no clear skin sensitization label. It may only cause mild skin redness and irritation after long-term unprotected massive contact
Eye Irritation Risk‌: Direct splashing of the liquid into eyes will cause moderate irritation. Failure to handle it in time may result in temporary eye redness and foreign body sensation
Inhalation Irritation Risk‌: High-concentration vapors volatilized at high temperature will slightly irritate the respiratory tract, causing temporary cough and dry throat discomfort
High Temperature Decomposition Risk‌: When heated above the decomposition temperature of 300°C, it will release trace amounts of irritating fumes containing carbon oxides, which may cause respiratory discomfort after inhalation
IV. Emergency Disposal and Supplementary Note
In case of skin contact, rinse with clean water and soap water. If the liquid accidentally enters eyes, rinse with running water for 10-15 minutes to relieve discomfort, no special emergency treatment for highly toxic substances is required
The existing public information does not fully cover the UN dangerous goods number, complete acute toxicity data and other core safety parameters of this chemical. It is recommended to request the complete MSDS safety technical specification for this batch of products from the supplier to obtain compliant full-dimensional safety risk information